Control Settings - GE GLC4100 Serie Manuel Du Propriétaire

About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door. Throughout this manual, features and
appearance may vary from your model.

Control Settings

Status Indicator Lights
1
The Status display tells you what's happening while the dishwasher is in operation and may flash,
indicating a malfunction. The lights will come ON indicating the sequence of operation the
dishwasher is in.
CLEAN
Cycles
2
The light above the selected pad will be ON to indicate which cycle has been selected.
HEAVY WASH
NORMAL WASH 5.9 gal., 56 min.
LIGHT WASH
CHINA CRYSTAL 6.1 gal., 39 min.
RINSE ONLY
2
Displayed when a wash cycle is complete. The light stays ON as a reminder that
the dishes are clean until the door is opened or until another cycle is selected.
8.5 gal., 89 min.
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-
on soils. Everyday dishes are safe to be used in this cycle.
This cycle is for medium/heavily soiled dishes and glassware.
6.1 gal., 36 min.
This cycle is for everyday dishes and glassware.
This cycle is for lightly soiled china and crystal.
1.2 gal., 6 min.
For rinsing partial loads that will be washed later. Do not use detergent with
this cycle.
4
3
ge.com
1
5