Door Removal - Beko Blomberg BRFB21612 Serie Manuel D'utilisation

Preparation
4

4.2 Door Removal

1.With the upper door closed, remove the single
screw in the hinge cover.
2.Open the door, take o the hinge cover remove
ambient sensor from cover.
Reed switch
connection
3.Close the upper door and remove the 3 screws
securing the hinge plate and disconnect reed
switch cable.
Reed switch
connection
Reed switch
connection
Ambient sensor
Ambient sensor
Ambient sensor
4.Open the door and tilt it 10-15 degrees and lift it
o the bottom hinge.
10 EN
Connecting reed
switch