Using Homewhiz - Beko Blomberg BRFB21612 Serie Manuel D'utilisation

Using HomeWhiz.

5.2
HomeWhiz - Refrigerator Wireless Connection
Steps
The steps below are for adding your refrigerator to
your network for the rst time. If you have installed
before, you can skip to the 10th and 11th steps.
Warnings : Bluetooth and Wireless network
connections must be turned on in your phone to
connect to the product. Location permission must
be given when making a wireless connection with
the product. Application noti cations must be
turned on when the application is downloaded and
used. (If warning noti cations are o , information
such as door open, high temperature alarm will not
be sent to your mobile device as a noti cation.)
From the
AppStore application store for your
IPhone, IPad mobile device, IPad mobile device, for
your Android mobile device from the Google Play
store You can download the latest version of
HomeWhiz application and install it on your mobile
device and you can install it by following the following
step.
When the connection is active, the wireless network
icon will light up continuously.
If the connection cannot be established for a certain
period of time, check your modem/connection
settings.
HomeWhiz application is used as the connection
interface.
The connection steps are described in the HomeWhiz
QUICK INSTALLATION GUIDE that comes with the
product.
See the troubleshooting section for answers to basic
questions.Note that the WiFi card consumes an
average of 0.1 W when the WiFi is button is o , and
an average of 0.4 W when the product is connected
to a strong signal WiFi network.
1. Open the HomeWhiz application on your device. If
you have not created an account, click on "
Account
" and follow the
instructions to set up a HomeWhiz account. If you
already have an account, login by entering your
e-mail and password associated with that account
14 EN
Create