HH Electronics Vector VRE-8AG2 Mode D'emploi page 8

DAISY CHAINING
VRE-8AG2
Utilising the MIX OUT to connect an additional
VRE system.
The signal from the MIX OUT is at line level, so
should be connected to the INSTRUMENT input
of the following system.
Any number of VRE can be connected in this way.
VRE1:
Initially set CH2 LEVEL control to zero, and in
conjunction
with the MASTER VOLUME control, adjust to
achieve the desired listening level.
VRE2:
Set the MASTER VOLUME to the same level as
that on the VRE-8AG2 primary.
Slowly increase CH2 LEVEL control to achieve the
correct level balance between the two cabinets.
VRE-12AG2 and VRE-15AG2
VRE1:
Initially set CH2 LEVEL control to zero, and in
conjunction
with the MASTER VOLUME control, adjust to
achieve the desired listening level.
VRE2:
Set the MASTER VOLUME to the same level as
that on the VRE-8AG2 primary.
Slowly increase CH2 LEVEL control to achieve
the correct level balance between the two
cabinets.
© 2021 HH Electronics Ltd
VRE1
VRE2
Designed and Engineered in the UK by HH Electronics LTD.
VRE1
CH 1 CH 2
VRE2
CH 1 CH 2
To an additional
VRE-8AG2 system.
CH 3 MASTER
CH 3 MASTER
To an additional
VRE system.
8