Table des Matières
Publicité
MEDIA PLAYER
(ALL MODELS)
Use the onboard player for playing MP3 encoded audio
tracks from SD card/USB or Bluetooth® device.
1. SD CARD SLOT: Insert your standard SD card here.
(Automatically detected on insertion, or if removed and
reinserted uses smart technology to resume play from the
previous point).
2. DISPLAY SCREEN: Display track information.
a. Play or Pause indicator.
b. What device is being used: USB or SD Card.
c. Time into track.
d. "bt" is displayed when connecting to a Bluetooth Device.
3. MEMORY STICK SLOT: Connect your USB thumb
drive here. If removed and reinserted, the system uses smart
technology to resume play from the previous point.
NOTE. The USB socket is for the playback of recorded
tracks only, not for charging a USB device.
4. MODE: Select the input source - SD card USB,
Bluetooth/TWS with two cabinets. See page for more information.
5. PLAY/PAUSE: Use this control to play or pause your MP3 music/backing track.
6. LOOP: Use this to enable/disable the looped playback modes. When using this button with an SD card or
USB thumb drive, there are 3 options:
ALL - Plays all the tracks on the root of the device in date order, then the sub folders.
ONE - Plays one track repeatedly (cycle to the required track to play using NEXT button (8).
FOD - Plays all track in the current active folder.
7. PREVIOUS: Press to skip to the preceding track. A prolonged press will reduce the volume of the MP3 player.
8. NEXT: Press to skip to the next track. A prolonged press will increase the volume of the MP3 player.
CONNECT TO BLUETOOTH DEVICE:
a. Toggle through the system modes and select Bluetooth (using MODE switch (4)).
b. On your Bluetooth capable device, make sure Bluetooth is enabled. Scan down the list of available devices -
search for: HH Vector and select.
c. Your Vector enclosure is now connected to your Bluetooth device and controlled using the PLAY/PAUSE,
PREVIOUS and NEXT BUTTONS.
d. Switching between a USB device and a Bluetooth device is possible, but the Bluetooth device will need to be
re-selected by pressing the MODE button once.
Always switch off and disconnect the power cord when not in use.
© 2021 HH Electronics Ltd
6
Designed and Engineered in the UK by HH Electronics LTD.
1
4
5
a
b
00:02
BT
2
3
6
7
8
c
5
Publicité
Table des Matières
