Table des Matières
Publicité
VRE-8AG2
A versatile onboard
1. MEDIA PLAYER:
player accepting SD card, USB thumb drive
and connection via Bluetooth. In addition to
this, a second cabinet can be connected via
Bluetooth using the TWS (True Wireless
Stereo) feature. See page for more
5
1
information.
2. MASTER VOLUME: Controls the
overall level of your VRE-8AG2 system.
3. CH1: A mono Input channel with Level
5
control and XLR Mic Input. Suitable for
balanced or unbalanced low level/low
impedance device eg. -mic (200-600ohms)
3
4
2
or electro-acoustic guitar.
6
4. CH2: A mono Input channel with Level
control and 6.3mm jack input. For Line
Level devices, this input is suitable for a
keyboard or drum machine for example.
5. AUX IN: A stereo Input for the
connection of a Line Level device via the
3.5mm jack input. Please use a stereo cable
when connecting to this Input. The Aux
level is adjustable via the by channel 2 Level
control.
6. MIX OUT: A BALANCED signal feed
which can be used to connect a second Vector
cab
110-120V~
220-240V~
(daisy chained - see page 8), active wedge
VOLTAGE SELECT
MAXIMUM POWER CONSUMPTION
monitor, house PA or recording console for
115 WATTS
example.
7
8
9
. VOLTAGE SELECT SWITCH: Although every
effort has
been
made to
7
select the correct voltage for the region of use, please check before powering up for the first time.
Damage could occur if the voltage is incorrectly set. See page for more information.
6
8. MAINS SWITCH: Turns the system on and off. Ensure the level controls are at minimum when switching
on and off.
9. MAINS INLET SOCKET AND FUSE: IEC input for connection of an appropriate mains lead. Only
replace fuse with the type indicated. See page 6 for more information.
Pay special attention to additional safety information on rear panel.
3
© 2021 HH Electronics Ltd
Designed and Engineered in the UK by HH Electronics LTD.
Publicité
Table des Matières
