⚫ Connection:
.
In the radiator and controller stand-by state, press
and blower switch
for 3s
at the same time to enter code configuration state (
flashing and
green light
flashing).
Once the network is successfully configured,
on the remote-control display flashes
3 times, at the same time if the green light
flashes for 3 times indicating that the
code matching is successful.
If it fails,
will disappear after flashes for 6s, and the fan switch
green light will
goes off after 20 seconds flashing, the network needs to be reconfigured.
will fast flash 4 times, when the radiator rack send data to controller.