Electrical Connection - Oceanic OCEAISH1750W1 Guide D'utilisation

Warning: this product shall be used in volume 2 and out of volume only according to
the national wiring rules (For France NF C 15-100)
Note: The drawing is for reference only .
We suggest that you contact a professional electrician for assistance.

ELECTRICAL CONNECTION

CAUTION: Before working, turn off the electricity at the main circuit breaker.
- The installation must be carried out in the rules of the art and meet the standards in
force in the country (NF C 15-100 in France).
- The unit must be connected to a standard wall box placed at least 60 cm from the
floor.
- The appliance must not be connected to an outlet with a power plug.
- The appliance must be supplied through a residual current device (RCD) having a
rated residual operating current not exceeding 30 mA.
- The appliance must not be connected to the earth wire (yellow and green wire).
ELECTRICAL CONNECTION
Blue or light gray wire connect to Neutral (220-240V)
Brown or red wire connect to Phase (220-240V)
Black wire connect to pilot wire. (Optional function to use in case of control by pilot
wire box)
- In the absence of pilot wire, insulate the bare end of the black wire to prevent
electrical contact with the other wires or ground.