Installation In The Bathroom - Oceanic OCEAISH1750W1 Guide D'utilisation

radiator type Ref: OCEAISH1750W1\
OCEASHS1750B1\OCEASHS2000W1\OCEASHS2000B1; complies with directive
2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.oceanic.eu.
INSTALLATION
RECOMMENDATIONS IMPORTANT READ BEFORE INSTALLATION
-
Do not install the unit directly below a socket.
- Do not use the appliance outdoors.
- Do not install the unit in an air current that could disrupt its regulation.
- Do not place the unit near a barrier limiting the airflow around it.
- Attach the heater vertically to the wall as described below.
- Choose screws and plugs suitable for the wall material and weight of the unit.
RECOMMENDATIONS FOR WALL MOUNTING
Do not make any changes to the unit or its mounting bracket on the wall!
Before installing the device, check the condition of the wall on which it will be fixed:
the wall must be in good condition, it must not show any damage (cracks, sagging,
humidity, ...).
Do not drill holes near old holes, even when they are closed.
It is imperative that you consult a building professional to use the anchoring system
(screws, dowels, etc.) appropriate for the material that constitutes your wall, as well as
the weight of the appliance. Observe the diameter of the fixing screws indicated in
this manual.
Do not modify the holes for securing the unit or its mounting bracket to the wall.
Drill the wall with a drill of the appropriate size for the anchoring system. Remove
debris and dust.
Regularly check the mounting points of the device on the wall. Tighten them if
necessary.

INSTALLATION IN THE BATHROOM