12. Parameter setting:
Under the OFF state, press
to switch the modes: F1 window open detection→F2 temperature compensation→
Exit (Off).
F1-Window
open
detection
F1-Window
open
detection
F2-
Temperature
compensation
for 5s to enter the parameter setting, then press
Figure
Description
Operate
and
the
window
display oF is closed, oN is open
(default is closed).
When user turning on this function
in the heating state, and the indoor
temperature suddenly drops by 5°C
within 5 mins. it means that the
windows of this room have been
opened.
The product will stop heating, it will
starts heating again after 65 mins. if
the indoor temperature still keeps
dropping, the product will stop
heating again, in cycle.
You can adjust the sensitivity of the
radiator by pressing
will
allow
you
temperature difference that causes
the heating to stop.
For example:
Sensitivity -2°C / comfort temperature 19°C
The heating will stop when the
→
temperature sensor records 21°C .
Sensitivity +5°C / comfort temperature 19°C
The heating will stop when the
→
temperature sensor records 14°C .
By default, the deviation is +/-2°C but
you can vary it up to +/-5°C by
advancing 1°C at a time.
to switch on & off
opening
function,
and
. This
to
define
the