Fracarro MOD-HDTV Mode D'emploi page 20

MOD-HDTV advanced settings via software
1- Download the software from www.fracarro.com Download section.
2- Unzip the "software MOD FR-HDTV software" file folder.
3- Connect the MOD-HDTV to your PC via the USB cable (Type A-male/B-male).
4- Wait a few minutes for the automatic driver's installation procedure.
5- If the USB drivers are not automatically installed, Windows will ask you to manually install the USB drivers;
during the manual installation refer to the "USB Drivers" folder.
6- Once Windows has successfully installed the USB drivers, you see a pop-up message that indicate that
the installation was successfully done.
7- Run the file "FRACARRO GUI 2V0" software. Below you will see the main screen (see Figure 5)
Fig.5
Guide to Software
1-From the "ComPort" menu select the correct USB port that connects the MOD-HDTV and confirm with
"Connect".
20