Care And Maintenance - Russell Hobbs 18663-56 Mode D'emploi

TO MAKE A QUICK CUP OF COFFEE

You can remove the carafe at any time. To prevent the filter holder from overflowing,
replace the carafe on the hotplate within approximately 20 seconds.
NON-DRIP FEATURE

Your Russell Hobbs coffee maker has been designed with a non-drip feature. If you
wish at any time during the brewing cycle, you may temporarily remove the glass
carafe from the unit and pour a cup of hot coffee. The warming cycle will be
interrupted and hot coffee will drip from the filter basket. This feature is also designed
so that coffee will not drip onto the warming plate if you remove the glass carafe from
the coffee maker during the brewing process.
SERVING AND KEEPING WARM

After brewing is completed you may remove the glass carafe from the warming plate.

For the best flavour serve the coffee immediately after brewing.

Put the glass carafe back on to the warming plate to keep the coffee warm.

As long as the coffee maker is turned on, the warming plate will keep the coffee at
drinking temperature.

Once the coffee is finished, or you do not wish to keep the coffee hot, switch the
coffee maker off.
NOTE: Always allow the coffee maker to cool down between brewing cycles for
approximately 5 minutes.

CARE AND MAINTENANCE


Unplug the appliance when not in use, before moving and before cleaning.

The permanent filter may be removed for easy cleaning. Ensure that you tip the
contents of the filter holder into the bin before starting the cleaning process.

Clean the outside of the coffee maker with a damp cloth, and buff with a dry cloth.

The heating element may be wiped with a clean, damp cloth when necessary.

Do not use any type of abrasive cleaner on any part of your coffee maker.

Do not use abrasive cleaning agents.
8