Cleaning, Care And Maintenance; Troubleshooting - Stiebel Eltron HSBC 300 cool Utilisation Et Installation

oPerATIoN

Cleaning, care and maintenance

5. Cleaning, care and maintenance
f Have the electrical safety of the appliance and the function f
of the safety assembly regularly checked by a qualified
contractor.
f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning the appliance.
Signal anode with consumption indicator
Material losses
!
If the consumption indicator changes colour from white
to red, have the signal anode checked by a qualified con-
tractor and if necessary replaced.
1 White = Anode OK
2 Red = Requires checking by qualified contractor
Scaling
Almost every type of water will deposit limescale at high temper-
atures. This settles inside the appliance and affects both perfor-
mance and service life. A qualified contractor who knows the local
water quality will tell you when the next service is due.
f Check the taps regularly. Limescale deposits at the tap out- f
lets can be removed using commercially available descaling
agents.
f Regularly activate the safety valve to prevent it from becom- f
ing blocked, e.g. by limescale deposits.
www.stiebel-eltron.com
1 2
6.

Troubleshooting

Problem Cause
The water does not heat There is no power.
up. The heating does not
work.
If you cannot remedy the fault, contact your qualified contractor.
To facilitate and speed up your request, provide the number from
the type plate (000000-0000-000000).
HSBC 300 cool | HSBC 300 L cool |
remedy
Check the fuses/MCBs in
your fuse box/distribu-
tion board.
No.: 000000-0000-000000
Made in Germany
35