Skil 9206 Guide D'utilisation page 12

Footplate adjustment
The footplate tilts in order to keep as much of
its surface in contact with the work surface (Fig.
6). To adjust, hold saw firmly and pivot foot-
plate to desired position.
The footplate can also be locked at desired
depths to optimize blade life and/or to limit
blade protrusion beyond the end of the foot-
plate when cutting into large diameter pipe or
into walls.
To adjust the footplate position depth, simply
loosen the two screws in insulated rubber boot
with wrench provided, slide and move the
footplate to the desired position and securely
tighten the screw with the wrench provided (Fig.
7).
12
Fig. 6
Adjustable Footplate
Fig. 7