How To Use The Scooter - VELOCIPTOR climb 2 ES 111 OR Manuel De L'utilisateur

HOW TO USE THE SCOOTER

First of all, it is advisable to adjust the disc brakes, tightening them or softe-
ning them, according to your driving style.
Swict On/ Off by key
- Unlock the alarm (if inserted) using the remote control and insert the key
under the battery voltage indicator, and turn it clockwise to turn the
scooter On.
The display and the voltage indicator will activate.
- Turn the key anticlockwise and remove it to switch off the scooter.
Switch On/ Off by remote control
If you forget or lose the key, you can turn on and turn off the scooter using
its remote control.
- With the scooter switched off, press the start button
to turn on the scooter.
- Press the lock button
inserting the alarm.
Start the engine by pressing the multifunction button.
Make sure that the stand is in the closed position, get on the scooter with
one foot and give yourself a slight push with the other; gently act on the
accelerator lever to start the electric motor.
To brake, release the accelerator, in order to make the engine brake act, or,
for more abrupt braking, use the disc brake levers.
on the remote control to turn off the scooter
47
on remote control