First Use - VELOCIPTOR climb 2 ES 111 OR Manuel De L'utilisateur

FIRST USE

Before first use, it is recommended to make some adjustments in order to
adapt the scooter to your height and driving style.
Adjusting the folding mechanism
If the main bar is loose or difficult to bend, you can adjust it. Turn the nut
located at the bottom of the handlebar (visible after folding the scooter).
This screw also controls the scooter folding mechanism; if the locking lever
is too hard, loosen the nut.
On the other hand, if the lever is too loose, tighten the nut on the screw
axis, in order to prevent the handlebar rod from sliding down when pressed
from above.
Adjusting the brake levers position
It is possible to loosen the fixing nuts of the brake levers and then change
their position, so that they are comfortable and safe for use.
Once the adjustment has been made, properly tighten the nuts.
35