VELOCIPTOR climb 2 ES 111 OR Manuel De L'utilisateur page 42

Display
SPEED LEVELS
The scooter has three speed levels.
To change the speed level, briefly press the M button: the speed level
number changes from 1 to 3
Display functions
Short press the Display function button (4) and the display will show the
following information:
• TRIP - single ride distance. Long press the M button to reset.
• ODO - total distance travelled in km.
• V - current voltage (may fluctuate during running/ instant load).
Cruise control
When you keep the same speed for about 10 seconds, cruise control is
activated: the symbol appears on the display.
Cruise control keeps the engine power constant (the speed may vary de-
pending on the slope of the terrain) even if the accelerator is not pressed.
The cruise control function is interrupted by pressing any brake lever or the
accelerator - the symbol disappears.
Voltage display
In a dedicated display, the battery voltage appears. When the battery is
charged, the voltage will be around 54V, and will drop as the battery is di-
scharged.
42