How To Use The Scooter; Remote Control Battery Replacement - VELOCIPTOR climb 2 Manuel De L'utilisateur

HOW TO USE THE SCOOTER

First of all, it is advisable to adjust the disc brake, tightening it or ma-king it
softer, according to your driving style.
Swict On/ Off by key
- Unlock the alarm (if inserted) using the remote control and insert the key
under the battery voltage indicator, and turn it clockwise to turn the
scooter On.
The display and the voltage indicator will activate.
- Turn the key anticlockwise and remove it to switch off the scooter.
Switch On/ Off by remote control
If you forget or lose the key, you can turn on and turn off the scooter using
its remote control.
- With the scooter switched off, press the start button
to turn on the scooter.
- Press the lock button
inserting the alarm.
Get on the scooter and make sure the stand is in the closed position; act
gently on the accelerator lever to start the electric motor.
To brake, release the accelerator, so that the engine brake works, or, for
more sudden braking, use the rear disc brake lever.

remote control battery replacement

To replace the remote control battery:
- Remove the two silver side parts by levering
with a slotted screwdriver.
Be careful not to damage the plastic hooks.
- Open the central part of the keyboard by
levering between the two parts;
- Remove the electronic board and replace the
battery (CR 2032).
- Close the remote control.
on the remote control to turn off the scooter
37
on remote control