VELOCIPTOR climb 2 Manuel De L'utilisateur page 29

first use
Loosening of the handlebar
The handlebar may vibrate and this behaviour may increase over time. If
the mechanism swings too much, it can be adjusted with the screw (5)
located where the handlebar folds (when the handlebar is bent, the bolt is
visible). By loosening the bolt, the oscillation increases, and vice versa. If the
bolt is unscrewed too much, it may not be possible to fold the scooter - in
this case, tighten the bolt.
Tire type and pressure
The scooter is fitted with 10" tubeless offroad tires.
The optimum tire pressure is around 36 p.s.i – 2.5 bar.
Handlebar height
Open the quick release clamp, adjust the handlebar according to your
height and then carefully lock the clamp.
29