CIAT CS2B Manuel D'installation page 8

  
CIAT NUI series programmable user interface is a
unit /wall-mounted, low voltage, user interface which
maintains room temperature and domestic hot water
temperature by controlling the operation of a
heating / cooling system.
A variety of features are provided including separate
heating and cooling set-points, 2 zone management,
domestic hot water management, keypad lockout,
backlighting, and scheduling for all week days with 2 or 4
OR  PERIODS 4HIS MANUAL COVERS USAGE CONlGURATION AND
installation of NUI.
NOTE: The NUI will mount the front cover (lid) only in
case of wall installation. Ignore references to lid in case
of unit installation.
   
½ÌÌÁÆ¿ ÌÀ½ ÌÁŽ ¹Æ¼ ¼¹Ñ
You must set the time and day before you can use any of
the NUI's programming features.
1. Open the lid.
2.
Press D/H/M SET CLOCK ( ) button.
3. Press the up or down button, to change the
hour. Stop on the correct hour.
4.
Press the D/H/M SET CLOCK ( ) symbol
ºÍÌÌÇÆ ¹¿¹ÁÆ ¹Æ¼ ÌÀ½ ÅÁÆÍÌ½Ë ÏÁÄÄ ¹ËÀ ÇÆ ÌÀ½
display.
5. Press the up or down button to change the
minutes. Stop on the correct number.
6.
Press the D/H/M SET CLOCK ( ) symbol
ºÍÌÌÇÆ ¹¿¹ÁÆ ¹Æ¼ ¼¹Ñ ÏÁÄÄ ¹ËÀ ÇÆ ÌÀ½ ¼ÁËÈĹÑ
7. Press the up or down button to change the
day. Stop on the correct number
8. Press OK button or close the lid.
8
    
ÇÍ»À  Ç ¾½¹ÌÍʽ
4HE UNIQUE 4OUCH @. 'O FEATURE ON YOUR THERMOSTAT IS A
revolutionary tool that lets you use a simpler programming
option – literally, touch and go – to help you get the
maximum comfort control from the entire comfort system.
With the touch of one Touch 'N' Go button – home (
away ( )and sleep ( )–you can tell your thermostat
where you'll be. To keep the home at that comfort level
INDElNITELY YOU ADD ONE MORE BUTTON nHOLD
you're set. It's the ideal choice for them whose schedule
VARIES FROM DAY TO DAY OR DOESN T lT INTO THE TWO OR FOUR OR
six predictable time periods allowed by the thermostat.
At the same time, these three comfort options – home,
away and sleep – are connected to the thermostat's full-
level programming power so that you get the home
comfort you desire exactly when you want it.
The three Touch 'N' Go buttons are preset at the factory
for typical heating, cooling and domestic hot water
TEMPERATURE SETTINGS AND ASSIGNED TO SPECIlC TIME PERIODS
You can change these temperature settings and the hours
you want to use them easily. Learn how to do that and
discover how useful this device is as you read through this
manual.
ÊǿʹÅÅÁÆ¿ ÌÀ½ ÇÍ»À  Ç ¾½¹ÌÍʽ
The Touch 'N' Go feature on your thermostat involves
home ( ), away ( ) and sleep (
immediately under the display. They are used for three
programming options.
4HE SIMPLER PROGRAMMING OPTION REQUIRES YOU TO EITHER
accept the preset temperature settings for when you are
home, away or asleep, or to set your own Touch 'N' Go
heating, cooling and domestic hot water temperature
settings. Either way, your home, away and sleep settings
are automatically linked to one of the time periods that
are also preset (and changeable) on the thermostat.
Here are the temperature settings that are
pre- programmed for your home, away and sleep periods.
ÇÍ»À  Ç ÈÌÁÇÆ Heat
Home 20° C
Away 15° C
Sleep 18° C
),
)– and
) buttons
Cool ÇŽËÌÁ» ÀÇÌ Ï¹Ì½Ê
24° C 60° C
28° C 50° C
26° C Not available