Home Theater - Panasonic PT-52LCX66-K Manuel D'utilisation

Theatre Speaker
You can control the theatre speaker with this unit's
Remote Control.
"Home theater" with speaker icon appears when a
Panasonic "Control with HDMI" home theatre system is
connected via the HDMI input (1).
Pressing the OK button toggles between TV and home
theatre volume control.
• "Ctrl with HDMI" must be set to "On".
• Limited to newer Panasonic Home Theatre, RAM theatre and
DIGA/DVD models with "Control with HDMI".
1
Press to select "Home theater"
or "TV speakers".
Press to activate the Home
theater or TV speakers.
Menu

Home theater

Picture
Audio
Timer
Lock
Memory card
Setup
Home theater:
Adjustment for Panasonic Amplifier, Panasonic
Player theatre, Panasonic RAM theatre.
Press for desired volume
level.
Press to mute the sound.
TV speakers:
The TV speakers are active.
Notes:
• Selecting "Home theater" mutes TV speaker sound.
• When "Home theater" is selected, the home theatre volume
control can be raised or lowered with the TV remote volume
button. The TV displays "Home Theater + / -" on screen.
• If home theatre/RAM theatre/Player theatre is currently off,
selecting the "Home theater" option will automatically turn the
equipment on.
• Turning off home theatre/Player theatre/RAM theatre
automatically switches unit to TV speakers.
One-touch Theatre Playback
If the "ONE TOUCH PLAY" key is pressed on the AV
amp or Player theatre Remote Control, the following
sequence of operations is performed automatically.
1. Home theatre/Player theatre power switches On and
playback begins.
2. TV power switches On and the playback screen is
displayed.
3. Audio is muted on the TV and switches to theatre.
Prog-out stop
When connecting external equipment to this unit - Stops
output of the picture and sound signals at the AV OUT
jacks for the input source selected in this menu to avoid
signal loop.
1
Menu
TV speakers
Picture
Audio
Timer
Lock
Memory card
Setup
2
Notes:
• The input signals connected to the terminal selected in
"Prog-out stop" menu cannot be output from AV OUT
terminals (both picture and audio).
• The Prog out will not output picture but can output only sound
if the input is either Component or HDMI and when "Prog-out
stop" is set to "Off" or other inputs.
Press to select "Other adjust".
Press to display the Other
adjust menu.
Setup
CH scan All
Language
Program channel
Input labels
CC
Other adjust
Press to select "Prog-out
stop".
Press to select "Off",
"Comp.1", "Comp.2",
"HDMI 1", "HDMI 2", "Video 1",
"Video 2", or "Video 3".
O t h e r a d j u s t
P r o g - o u t s t o p O f f
C t r l w i t h H D M I O n
P o w e r o f f l i n k S e t
P o w e r o n l i n k N o
57