Panasonic PT-52LCX66-K Manuel D'utilisation page 24

RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed.
Mode type
VGA400 (70 Hz)
VGA480 (60 Hz)
Macintosh 13˝
VGA480 (75 Hz)
SVGA (60 Hz)
SVGA (75 Hz)
SVGA (85 Hz)
Macintosh 16˝
* XGA (60 Hz)
* XGA (70 Hz)
* XGA (75 Hz)
* XGA (85 Hz)
* Macintosh 21˝
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB 15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
Signal data
No. of dots Horizontal frequency
(H × V)
640 × 400
640 × 480
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
832 × 624
1 024 × 768
1 024 × 768
1 024 × 768
1 024 × 768
1 152 × 870
Vertical frequency
(kHz) (Hz)
31.47 70.08
31.47 59.94
35.00 66.67
37.50 75.00
37.88 60.32
46.88 75.00
53.67 85.06
49.73 74.55
48.36 60.00
56.48 70.07
60.02 75.03
68.67 85.00
68.68 75.06
23