Panasonic PT-52LCX66-K Manuel D'utilisation page 20

How to connect the HDMI input terminal
Recommended HDMI Connections
Follow the connection diagrams below for HDMI
control of a single AV equipment such as a Panasonic
DIGA-DVD recorder, RAM Theatre or Player Theatre
system. Refer to page 56 for Setup Menu settings and
additional control information.
• Optional HDMI and/or optical cables are not provided.
Connecting this unit to a DVD recorder, RAM theatre or Player theatre
HDMI
HDMI OUT
DIGA
(Panasonic DVD Recorder)
Setting this unit after connections
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") first to "Off" and then "On"
using the Setup Menu. (p. 56)
If connection (or setting) of equipment compatible with
HDMI control is changed, switch the power of this unit
Off then On again while the power of all equipment is
On (to this unit to correctly recognize the connected
equipment) and check that DIGA, RAM theatre and
Player theatre playback operates.
AUDIO
HDMI OUT
Or
Panasonic RAM theatre/
Panasonic Player theatre
• For DIGA:
- Connect with HDMI cable (HDMI 1 is
recommended).
• For RAM theatre and Player theatre:
- Always connect to the HDMI 1
terminal.
- Connect with HDMI cable and audio
cable.
- Connect this unit's AUDIO OUT
(L&R) to listen to the TV program
through the theatre system.
AUDIO IN
19