Panasonic PT-52LCX66-K Manuel D'utilisation page 66

Note:
• Remove Front Cover after Front Door (p. 10) is opened.
2
Pull on both ends of the Front Cover
fingertips to remove it.
3
(1) Turn the Lamp Cover Lock/Open Knob to the
left.
(2) Pull the Lamp Cover out and down to open it.
(1)
(2)
4
(1) Turn the Lamp Unit Lock/Open Knob to the
left.
(2) Grasp the Lamp Unit Lock/Open Knob and
slowly remove the Lamp Unit as shown.
(1)
(2)
CAUTION
• The Lamp Unit is hot right after use and may cause
burns if touched.
• Please allow the Lamp Unit to cool before handling or
replacing it.
5
with your
1
Front Cover
1
6
Lamp Cover
Lock/Open Knob
Lamp Cover
7
Lamp Unit
Lock/Open Knob
Lamp Unit
(1) Insert the new Lamp Unit being careful of the
insertion direction.
• Press on the arrow mark to confirm proper
insertion.
(2) Turn the Lamp Unit Lock/Open Knob to the
right until it clicks.
(2)
(1)
Notes:
• Properly dispose of the old lamp. Please see page 64.
• Secure the Lamp Unit and Lamp Unit housing door. If
they are not secured, a protective circuit will not allow the
lamp to turn on.
• At this point, confirm that the Lamp Unit will not come out
by pulling on the Lamp Unit Lock/Open Knob.
(1) Close the Lamp Cover.
(2) Turn the Lamp Cover Lock/Open Knob to the
right.
(2)
(1)
Be sure that the Hook on the Front Cover is
securely fastened to the unit as shown.
Front Cover
After lamp replacement, you must reset the lamp
time. Refer to the instructions enclosed with the
lamp unit (Part No.: TY-LA1001-K).
Lamp Unit
Lock/Open Knob
Lamp Unit
Lamp Cover
Lock/Open Knob
Lamp Cover
Hook
65