Connections; Connecting To Computer - Panasonic PT-LB30NTU Mode D'emploi

Connections

Notes on connections
B Read the instruction manual for each peripheral device carefully before connecting it.
B Turn off the power supply for all peripheral devices before making any connections.
B If the cables necessary for connection are not included with the peripheral device or
available as an option, you may need to prepare a proper cable for the device concerned.
B If there is a lot of jitter in the video signal, the projected image may flicker. In such cases,
it will be necessary to connect a TBC (time base corrector).
B Refer to the list on page 62 for details on compatible signals which can be input to the
projector.
B Only one audio system circuit is available for the AUDIO IN L-R connectors, so if you
change the audio input source, you will need to remove and insert the appropriate plugs.

Connecting to computer

Computer for
control use
DIN 8-pin
(male)
RGB signal cable
(accessory)
20-E
NGLISH
Serial adapter
(ET-ADSER : sold
separately)
Computer
Computer
RGB signal cable
Audio system
Refer to the accessory CD-
ROM for details on the
wireless network that can
be used for controlling the
projector with a personal
computer.
(PT-LB30NTU only)
Monitor