Date Setting - Techno Line WS 8100 Mode D'emploi

YEAR SETTING
The year can be selected sequentially from 2010 to 2029 and will then start over again (default
setting 2010). The last 2 digits of the year will be visible on LCD2.
1. The year digits will start flashing on LCD2. Select the desired year by use of the + / SEC key.
2. Press and release the SET / MIN key to switch to the "Month Setting".
Note: the year will only be shown in setting mode.
MONTH SETTING
1. The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by use
of the + / SEC key.
2. Press and release the SET / MIN key to move to the mode "Date Setting".

DATE SETTING

1. The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day by
use of the + / SEC key.
Note: The data can only be set in conjunction with the selected month. For example, it is not
possible to set the data 30 if the months of February is selected.
2. Press and release the SET / MIN key to enter the "ºC/ºF temperature setting".
°C OR °F TEMPERATURE SETTING
The temperature can be set to display Celsius (ºC) or Fahrenheit (ºF):
1. The characters "°C" or "°F" will start flashing on LCD1 (Default setting °C). By use of the + /
SEC key select "°C" for temperature display in degrees Celsius or "°F" for degrees
Fahrenheit.
2. Press and release the SET / MIN key to enter the "Language setting".
24