Kenmore 970-7030 Serie Guide D'utilisation Et D'entretien page 10

Installation (Continued)
3. Loosen or remove screw.
Loosen or Remove
Screw
Open
Door
90
Degrees
Bottom of Door
Loosen/Remove Screw (where applicable)
NOTE
Adjustable hinge should only be used
after doors have been leveled with rollers.
4. Lift the door while adjusting the
washer. To raise the door, rotate
washer clockwise (when viewed from
the bottom). To lower door, rotate
washer counter-clockwise (when
viewed from the bottom).
Lower
Door
Hinge
Washer
Raising/Lowering Door
5. Retighten the screw (where
applicable), ensuring it is between the
spokes of the washer. Screw will not
All manuals and user guides at all-guides.com
To adjust the flipper mullion:
Raise
Door
10
be tight, just insert until it is flush with
the hinge.
Re-tighten Screw
Hinge
Washer Spokes
Screw
Screw (where applicable)
NOTE
If after adjusting doors higher the door makes
a popping/clicking sound, remove screw and
replace with the longer one supplied in the
handle package (select models).
1. Loosen the screw located on the
flipper mullion hinge.
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
Flipper
Mullion
Screw