Anti-Splinter Insert - Bosch 1590EVS Consignes De Fonctionnement/Sécurité

For vacuuming, a Bosch Air Sweep vacuum
hose (optional accessory) can be directly
connected to the vacuum hose adapter tube
(Fig. 6).
FIG. 5
ATTACHING NON-MARRING OVERSHOE
Your tool is equipped with a protective
plastic overshoe that protects finer surfaces.
To attach, hook overshoe over front of metal
footplate and snap into place at rear of
footplate (Fig. 7).

ANTI-SPLINTER INSERT

To minimize splintering of the top surface of
the material being cut, place the anti-splinter
insert in the blade opening of the footplate
(Fig. 7).
The anti-splinter insert can be inserted into
the footplate in two positions.
For narrow saw blades, place the insert
completely to the front of the opening
(Fig. 8).
For wider saw blades, place the insert
completely to the rear of the opening
(Fig. 9).
Note: This insert will only work with blades
that have ground sides such as T301CD,
T101B, T101D, and T101DP.
All manuals and user guides at all-guides.com
For maximum vacuum dust pick up, dust
shroud must be attached.
PLASTIC
POST
FIG. 7
ANTI-SPLINTER
INSERT
FIG. 8
-8-
FIG. 6
FOOTPLATE
NON-MARRING
OVERSHOE
FIG. 9