Axis Q8414-LVS Guide D'installation page 14

AXIS Q8414–LVS Network Camera
Maximum Tilt Positions for the Lens (Continued)
Tilt
up
Tilt
down
Install an SD card
It is optional to install a standard or high capacity SD card (not included), which can be used for
local recording with removable storage.
1. Loosen the screws in the front and remove the camera assembly.
2. Insert an SD card (not included) into the SD card slot.
3. Hold the camera assembly so that the IR window on the front is in a six o'clock position,
and place the bottom of the camera assembly against the bottom of the back chassis
opening.
14