Environmental Protection; Declaration Of Conformity - Worx WX152 Mode D'emploi

is for drill operation. Regulate the torque
adjusting ring to a higher position to reach the
best result.
3. REASONS FOR DIFFERENT BATTERY
PACK WORKING TIMES
Charging time problems, as above, and having
not used a battery pack for a prolonged time
will reduce the battery pack working time.
This can be corrected after several charge and
discharge operations by charging & working
with your drill. Heavy working conditions such
as large screws into hard wood will use up the
battery pack energy faster than lighter working
conditions. Do not re-charge your battery pack
below 0°C and above 45°C as this will affect
performance.
MAINTENANCE
Remove the battery pack from the tool
before carrying out any adjustment,
servicing or maintenance.
Your tool requires no additional lubrication or
maintenance.
12
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
Lithium-Ion Cordless Drill/Driver
All manuals and user guides at all-guides.com
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description WORX Lithium-Ion Cordless
Drill/Driver
Type WX152 WX152.1 WX152.2
WX152.3 WX152.4 WX152.5 WX152.31
WX166 WX166.1 WX166.2 WX166.3
WX166.4 WX166.5 WX166.6 WX166.9
WX166.31 (1-designation of machinery,
representative of Cordless Drill)
Function Drilling/ Tightening and
loosening screws, nuts
Complies with the following Directives,
2006/42/EC,
2011/65/EU,
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-1
EN 60745-2-2
The person authorized to compile the technical
file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 6242, Newbury, RG14 9LT,
UK
Suzhou 2016/03/09
Allen Ding
Deputy Chief Engineer,Testing &
Certification
EN