elem ELDEEP3740 Mode D'emploi Et D'entretien page 21

TECHNICAL DATA
ELDEEP3740
Type
Mains voltage
Mains frequency
Power input
Power output
No load speed
Max. pump capacity l/min
Max. lift m
Max. submerging depth
Max. grain size
Max. water temperature
Câble 10m
Type of protection / Insulation class
Weight
ELDIVE-1A
Type
Mains voltage
Mains frequency
Power input
Power output
No load speed
Max. pump capacity l/min
Max. lift m
Max. submerging depth
Max. grain size
Max. water temperature
Câble 10m
Type of protection / Insulation class
Weight
ELDIVE-3A
Type
Mains voltage
Mains frequency
Power input
Power output
No load speed
Max. pump capacity l/min
Max. lift m
Max. submerging depth
Max. grain size
laden water
220-240V
50 Hz
0.70 Kw
0.37 Kw
-1
2850 min
5.1m³/h
40m
9m
0.5mm
35°C
2
H07 RNF 3 x 1 mm
IP68
8.5 Kg
laden water
220-240V
50 Hz
0.70 Kw
0.37 Kw
-1
2850 min
5.1m³/h
40m
20m
0.5mm
35°C
2
H07 RNF 3 x 1 mm
IPX8
8.5 Kg
laden water
220-240V
50 Hz
1.0 Kw
0.75 Kw
-1
2850 min
5.1m³/h
50m
20m
0.5mm
Max. water temperature
Câble 20m
Type of protection / Insulation class
Weight
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : < 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
35°C
2
H07 RNF 3 x 1 mm
IPX8
13.5 Kg
ATTENTION !
must be worn.