Attach The Camera To A Tree - Reolink Go PT Instructions

Install the Security Mount
Step 2
Install the antenna to the
camera.
13 English
Step 1
Drill holes in accordance with the mounting
hole template and screw the security mount
to the wall. If you are mounting the cam era
to a masonry or on any other hard surface,
remember to insert the plastic anchors into
the hole.
NOTICE: For better 4G
signal strength, it is
best to install the
antenna upwards or
horizontally.
Step 3
Screw the camera to the security mount
and adjust to the proper direction.

Attach the Camera to a Tree

Step 1
Loosen the screw
on the security
mount and
remove the tree
mount.
Step 2
Thread the loop
strap through the
slots and fasten
the strap
English 14