Plug & Auto Setup - Samsung DVD-R128 Mode D'emploi

Plug & Auto Setup
Your DVD Recorder will automatically set itself up when
it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few
minutes. Your DVD Recorder will then be ready for use.
1 Connect the RF cable as indicated on page
18.
(Connecting Your DVD Recorder to the TV Using the RF
Cable and scart cable.)
2 Plug the DVD Recorder into the mains.
"Auto" in the front panel display flickers.
Select the language using the ...† buttons,
3
then press the OK button.
DVD-Recorder
No Disc
Language Set
MOVE OK
4 Press the OK button or wait for a few
seconds to start the auto setup.
DVD-Recorder
No Disc
Auto setup will be started.
Check antenna and TV cable connection.
OK
Select "Country" using the ...†œ √
5
buttons to select your country then press
the OK button.
DVD-Recorder
Country Selection
Autom. Instal.
A NL
Handmatig Instal.
B I
DK N
FIN P
D E
MOVE OK
Auto Setup
English
Français
Deutsch
Español
Italiano
Nederlands
RETURN
Auto Setup
RETURN
Auto Setup
S PL √ √
√ √
CH CZ
TR Others
GR
HU
RETURN
• Refer to following abbreviation table when selecting "Country".
A(Austria) NL(Netherlands) S(Sweden)
B(Belgium) I(Italy)
DK(Denmark) N(Norway)
FIN(Finland) P(Portugal)
D(Deutschland) E(Spain)
• The DVD Recorder searches for the stations according to a preset
preference list corresponding to the country that you have selected.
Auto Channel scan will be started.
6
Auto channel memory
Stop
• The number of stations automatically stored by the DVD
Recorder depends on the number of stations that it has found.
7 Check the date and time.
DVD-Recorder
No Disc
Date
JAN 01 2006
SUN
MOVE OK RETURN
• if it is : Correct, press the OK button then the date and time
will be saved. If you don't press the OK button, the
date and time will be saved automatically after 5
seconds.
• if it is : Incorrect, input correct Time, Date, Year using ...†œ √
buttons or number buttons. Press the OK button then
the date and time will be saved. When you need to
change clock setting, you can set up it manually.
(see page 26.)
Now, DVD Recorder is ready for use.
■
Function for "Plug & Auto Setup" is fixed
NOTE
already. So if you want to change this fixed
one, you can change it by Presetting the
Stations in OSD "Presetting Channels with
the Manual set up function" menu.
(see page 28)
Auto Setup function can be performed by
■
pressing and holding down the PROG (
buttons on the front panel of the DVD Recorder
simultaneously for more than 5 seconds with
no disc in the DVD Recorder.
PL(Poland)
CH(Swiss) CZ (Czech)
TR(Turkey) Others
GR(Greece)
HU(Hungary)
17%
Auto Setup
Time Auto Clock
12 00 On
)
25
English -