Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B
B
Installation
Installation kits
Guide
1
Guide cover
2
Slider
3
Slider cover
4
Short screw
5
Long screw
6
Rubber seal
7
Middle support cover
8
Installation of the appliance
Make sure that the dimensions of the unit as well as the ventilation are adequate.
Push the appliance into the unit slowly and carefully. Make sure that the opening side is as
close as possible to the unit wall.
Screw a guide into the holes on the side of the appliance door using the short screws. Insert
11
the slider into the guide, then fully open and close the appliance door and the wooden door to
make sure that the wooden door can close fully and smoothly.
Slider
1
Screw
2
Guide
3
Open the appliance door and the wooden door at the same time, then mark the position in
12
which the slider can work well from all angles while the door is closing or opening. Remove
the slider from the guide, then secure the slider to the wooden door using 2 short screws.
Then attach the slider cover to the slider.
Unscrew the guide from the appliance door.
Repeat steps 2 through 5 to attach another slider and another slider cover.
Slider
1
Screw
2
When using the appliance
Utilisation de l'appareil
7
7
EN
FR
x
4
x
4
x
4
x
4
x
27
x
2
x
1
x
2
Publicité
Table des Matières
