IROX EBR606C Mode D'emploi page 24

(ENG)
STEP 1
BATTERY INSTALLATION FOR MAIN UNIT
1. Take away the removable stand from the weather station (main unit). See STEP 1
2. Open the battery compartment on the rear of the weather station. See STEP 2
3. Insert 2 AAA size 1.5V alkaline batteries as indicated in the correct polarity.
4. Close the battery compartment.
5. Put back the removable stand and put the weather station on a table or mount it
on the wall without the removable stand.
6. Insert the plug of the adapter into the DC 5V IN Jack of the weather station and
connect the adaptor to a socket-outlet (100-240V AC).
Note:
This EBR606C weather station must work with the adaptor. If you remove the
adaptor, the EBR606C will turn off the display, save the last reading of the tem-
perature and weather forecast and keep the internal clock running by the back-up
battery.
Note:
Replace the batteries when the low battery indicator appears on the top-right
corner of the display.
All manuals and user guides at all-guides.com
~ 24 ~
STEP 2