Electrolux TK SL 3E Notice D'utilisation page 81

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.
Push down unlock button on large
mesh filter.
Large mesh filter jumps up.
5.
Take out fine strainer.
6. Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and
cleaned of fluff if necessary.
All manuals and user guides at all-guides.com
7.
8. Remove fluff from the entire filter area.
9. Press both journals of the large mesh fil-
10. Re-insert fine strainer.
11.
Cleaning the door seal
Clean the door seal with a moist cloth imme-
diately after the drying cycle is completed.
Emptying the water reservoir
Empty the water reservoir after every drying
cycle.
To do this, grip the top of the large
mesh filter and pull it forwards until it
comes loose from the two brackets.
It is best to use a vacuum cleaner for
this purpose.
ter into the brackets on the loading
door until they snap into place.
Press against the large mesh filter until
it locks into the interlock.
If the fine strainer is not fitted, the large
mesh filter will not snap into place and
the loading door cannot be closed.
electrolux 81

Publicité

Table des Matières
loading

Table des Matières