Electrolux TK SL 3E Notice D'utilisation page 78

78 electrolux
Selecting the programme
Use the programme selector to set the pro-
gramme you require. The estimated time to
end of the programme appears on the
LCD, e.g. ( hours . minutes ).
During the cycle, time elapses by steps of
one minute.
DRYNESS (Trockengrad)
Increases the dryness of the dried laundry
adequately to the selected level:
, . This option helps to achieve
satisfying result of drying.
- default dryness level.
SPIN SPEED (U/Min.)
Shorten the drying cycle adequately to the
spin speed the laundry was spun previously
in the washing machine. The higher spin
speed was, the shorter drying cycle length.
Available spin speed values (rpm): from
up to (with 200 rpm steps)
This option allows to save time and energy.
Selecting additional options
The additional options available for the dry-
ing programmes are delicate , long anti-
crease , sensitive and buzzer
1. By turning the knob choose a drying pro-
gramme.
2. To set the option press OPTION but-
ton . You will see available options
shown as icons on the screen:
All manuals and user guides at all-guides.com
3. Press alternately OPTION button to se-
4. Option selection mode is finished when
delicate
,
For especially gentle drying of sensitive fab-
rics with the
ture-sensitive textiles (e.g. acrylic, viscose).
Programme is executed with reduced heat.
delicate is only suitable for use with loads of
up to 3kg.
When the option is active, the delicate
icon is on.
long anti-crease
A long anti-crease phase lengthens the anti-
crease phase (30 min.) at the end of the dry-
ing additionally by 60 minutes. The drum ro-
tates at intervals during this phase. This
keeps the laundry loose and free of crea-
ses. Phase lasts in total 90 minutes. The
laundry can be removed at any time during
the anti-crease phase.
When the option is active, the long anti-
crease
sensitive
For gentle drying of fabrics that are frequent-
ly worn. Programme starts on full heat set-
ting, which is then reduced as the pro-
gramme progresses to be kind to the wash-
ing.
When the option is active, the sensitive
icon is on.
delicate long an-
ti-
crease
delicate icon flashes. Flashing icon
means: selected but not active. To acti-
vate selected option press OK button.
Activated option is visible as flashing
icon with dash beneath.
lect appropriate options and OK button
to activate it. Active options are always
on as icons with dash beneath.
you go through all of them or you stop
selecting. Only activated option icons
are on.
Some options cannot be selected to-
gether as delicate and sensitive . Some
of them are not selectable with certain
programmes
To deselect an option follow the same
steps. Option icon should disappear.
care label and for tempera-
icon is on.
sensi- buzzer
tive