Rocky Mountain POWERPLAY Guide D'utilisation page 15

24
Powerplay dual suspension
Description Part # Location
Battery Retaining Pin,
180566-012 Battery
M6X12
Battery Set Screw,
1808024 Down Tube
M5X20
Screw, M8X30 1807121 Powerplay Upper Rear Frame Mount
Powerplay Upper Front Frame Mount And Torque Arm
M8X60 Bolt 1808023
(Under Driveside Cover)
Screw M6X30 1807119 Torque Arm
Screw M6X16 1807120 Torque Arm
Screw, M8X25 1807123 Powerplay Bash Bracket
Screw, M8X65 1807122 Powerplay Bash Bracket
Screw, M8X50 1807124 Powerplay Bash Bracket
Bolt, M8X18 1807126 Chainstay Pulley Axle
Screw, M5X12 1807152 Chainstay Pulley Bracket
Axle, Mid Drive 1457014 Mid Drive Pully Axle
Torx Screw, M5X12 1808028 Brake Rotor
Hanger Bolt 3227001 Derailleur Hanger
Axle, 12Mmx173Mm 3227009 Rear Axle
Screw, M5X16
1806009 Head Tube Panel
M5X16
Screw, M5X22 1808037 Drive Cover, Top
Screw, M5X12 1808036 Drive Cover, Bottom
Powerplay Owner's Manual Powerplay Owner's Manual
Tool Torque Notes
kg/cm Nm lb/in
Secures 56, 70 And 81Mm Battery Case Bolts, Blue Loctite
4mm hex
40.8 4.0 35.4
2.5mm hex 20.4 2.0 17.7 Ensure Set Screw Bottoms On Battery Plate
5mm hex 142.8 14.0 123.9 Loctite, Tighten First To 10Nm In Sequence, Then 14Nm Final
6mm hex 142.8 14.0 123.9 Loctite, Tighten First To 10Nm In Sequence, Then 14Nm Final
4mm hex 101.9 10.0 88.5
4mm hex 101.9 10.0 88.5
5mm hex 142.8 14.0 123.9 Loctite, Tighten First To 10Nm In Sequence, Then 14Nm Final
5mm hex 142.8 14.0 123.9 Loctite, Tighten First To 10Nm In Sequence, Then 14Nm Final
5mm hex 142.8 14.0 123.9 Loctite, Tighten First To 10Nm In Sequence, Then 14Nm Final
6mm hex 81.6 8.0 70.8 Loctite, Ensure No Play And Pulley Spins Freely
3mm hex 61.2 6.0 53.1 Loctite
6mm hex 102.0 10.0 88.5 Loctite, Ensure No Play And Pulley Spins Freely
T25 Torx
63.2 6.2 54.9 Loctite, Torque Rotor As Per Manufacturers Instructions
driver
6mm hex 204.0 20.0 177.0 Loctite, Left Hand Thread
6mm hex 102.0 10.0 88.5 Grease Threads And Axle Shaft
3mm hex 15.3 1.5 13.3 Grease, Do Not Over Tighten
3mm hex 15.3 1.5 13.3 Grease, Do Not Over Tighten
3mm hex 15.3 1.5 13.3 Grease, Do Not Over Tighten
25