Unpacking; Intended Use - IKA R 2722 Mode D'emploi

Unpacking

• Please unpack the device carefully
• In the case of any damage a detailed report must be
sent immediately (post, rail or forwarder).
The adjustment screw (3)
NOTICE
can be used to compensate
for unevenness on the set-
up plate. Use the lock nut to
lock the adjustment screw.
Use
The R 2722 H-stand and the R 2723 telescopic stand
are suitable for larger, heavier devices and attach-
ments that require absolute stability.
The R 2723 telescopic stand should only be used to hold,
raise and lower stirrers and dispersers. With the pneumat-
ic spring stand rod, instruments and attachments can be
raised and lowered smoothly and without difficulty.
All manuals and user guides at all-guides.com
Unpacking
Scope of delivery R 2722
•
•
Scope of delivery R 2723
•
•

Intended Use

Area of use
- Laboratories
The safety of the user cannot be ensured:
•
•
The stand should only be used if it is in perfect working
condition. The correct functioning of the stand must be
checked at regular intervals.
R 2722 H-Stand
Opertating instruction
R 2723 Telescopic stand
Opertating instruction
- Manufacturing plants
if the stand is used in conjunctions with accessories
not made or recommended by the manufacturer
if the stand is not used for the intended purpose as
specified by the manufacturer.
13