Haier HWS84GA Mode D'emploi page 27

Troubleshooting
Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages.
▶ A damaged supply should only be replaced by the manufacturer, its service agent or
similarly qualifi ed persons in order to avoid a hazard.
Error Code Cause
rH The appliance gives a high-temper-
ature warning when the upper com-
partment's temperature has been
higher than 25 °C for 3 hours.
rL The compressor stops working when
the temperature is lower than 0 °C.
The low temperature warning is given
when the temperature has been lower
than 0 °C for 2 hours.
24
Solution
Ambient temperature is too high.
The appliance working tempera
ture should be between 10°C and
38 °C.
Ambient temperature is too low.
The appliance working tempera-
ture should be between 10 °C and
38 °C.
EN