Fastening The Antenna To A Wall - Abus TVAC17000 Manuel Utilisateur

Now remove the threaded screw to attach the mount to the plate.
Make sure that the ribbed surfaces are placed on top of each other so the angle can be
adjusted incrementally.
Now guide the screw in on the side on which there is a notch to ensure it can be
countersunk.
Refasten the screw using the split washer and the nut.
To fasten the mount to the pole, please proceed as described under step 2 below.

4.2 Fastening the antenna to a wall

Only tighten the screws and nuts after you have set the preferred reception position.
First drill suitable holes at the position where it will be fastened. Please use the wall mount as
a drilling template to do so.
Then insert the wall plugs into the holes.
Now fasten the mount to the wall by screwing it on using the screws provided.
All manuals and user guides at all-guides.com
15
English