OPERATION
CAUTION:
Always use shoulder harness when using metal blade
Attachment of shoulder harness
Wear the shoulder harness on your left shoulder. Make sure that the buckle
cannot be taken off with pulling it off. Hang the tool as shown.
NOTICE:
Be careful not to trap clothing, etc., in the buckle.
Detachment of shoulder harness
WARNING:
Failure to maintain complete control of the machine at all could result in serious
of the buckle to release the tool.
Be extremely careful to maintain control of the machine at this time. Do not
Correct posture
ground.
WARNING:
Always position the tool on your right-hand side. Correct positioning of the tool
caused by kickback.
WARNING:
Be extremely careful to maintain control of the tool at all times. Do not allow
operator.
16