Ten Haaft CARO Digital MA Manuel D'utilisation page 82

All manuals and user guides at all-guides.com
Timer
The timer is determined to process comfortably a hard disc record by time
control.
Timer recording – receivers without „HD" option:
The timer is used to conveniently record programs on the hard disk at preset times.
E
The timer function is also available on devices without optional hard disk. This
function is particularly helpful if you want to be sure not to miss a program on a
certain channel. The receiver will then switch over to the channel as programmed in
the timer.
The timer can manage up to 12 recording sessions. Either a defi ned recording date
or individual days of the week can be selected.
To program sessions, select „Timer" from the main menu. The overview shows all
dates of the 12 entries. Use the OK key to edit individual entries. To determine whe-
ther a fi xed date or fi xed weekdays are programmed in the timer, press the LIST key
when in the date line. If a time before the starting time or identical to the starting
time is set as end time, the recording will continue into the following day.
The correct function of the timer requires the internal clock to be set correctly.
Check the time displayed in the status bar to verify.
To exit the timer settings, press EXIT at any time. If any setting has been changed or
added, press OK to confi rm the storing of the changes.
Programming programs from the EPG:
Programs from the EPG can be directly copied into a free timer position by pressing
LIST in the overview of the day or in the details window of the EPG. The timer menu
then appears so that the new entry can be edited manually. Press EXIT twice to exit
the settings dialog.
82