Ten Haaft CARO Digital MA Manuel D'utilisation page 64

Fault code recognition
Malfunctions of the automatic antenna unit may occur e. g. when the antenna's
motion is obstructed by branches or snow. Such malfunctions are automatically
detected and will be displayed by the satellite mouse as fault codes.
E
E 07/ Short-circuit/open circuit in antenna cable or at antenna:
E 09 Check the white antenna cable and the connectors at the receiver and
at the LNB.
E 10 The supply voltage drops considerably:
Recharge the battery as soon as possible. Check the wiring and the
connection of the system to the voltage supply. .
E 16 Incorrect model confi guration. / Error occurred during model
confi guration:
An update may have been performed incorrectly. The system must be
serviced by the manufacturer.
E 17 Re-Init activated.:
Undefi ned memory content detected. The faults were corrected.
Switch the system off and back on. You may have to change some
settings (e. g. search satellite).
No No power supply:
Display Maybe the violet fuse at the receiver has a fault. Replace it by a new 3A
fuse. If the system is a 24V one, you may also use a 2A fuse.
Invert poles - power supply:
Please check the correct positioning of the electric + and - connections
and voltage. If this is left for too long, the receiver may be damaged. !!
External Sat Mouse Display not plugged:
Check if the RJ plugged in or snapped.
All manuals and user guides at all-guides.com
64