Klarfit Gym 5000 Mode D'emploi page 40

Step 8
Attach back cushion (58) to vertical support (5)
using Hex bolts M8x45 (80- 1 set) washers.
Attach seat pad (57) to seat support (6) using
Hex bolts M8x45 (80-1 set), washers.
Attach arm cushion (60) to arm cushion sup-
port (9) using Hex bolts M8x20 (63 - 1 set),
washers.
Step 9
Attach pull up left & right arm (52,53) to ver-
tical tube (59) using Hex bolts M10x50 (74 - 2
sets), washers and nuts.
Insert handle bar (16) into
pull up left & right arm
(55,56) using Hex bolts
M10x20 (78 - 2 sets),
washers and nuts.
Attach sit up bench frame
(64) to vertical tube (59)
using locking pin (84)
40