Unit Specifications; For Your Safety; Initial Operation - Bosch AL 2498 FC PROFESSIONAL Instructions D'emploi

Unit Specifications

Battery charger
Part number
Battery charging
voltage (automatic
voltage detection)
Charging current:
Rapid charging
(max.)
Trickle charging
(approx.)
Allowable
temperature range
Charging time
per battery voltage/
capacity, approx.
NiCd:
7.2 – 14.4 V (2.0 Ah) [min] 15
24 V (1.7 Ah)
24 V (2.0 Ah)
24 V (3.0 Ah)
NiMH:
7.2 – 24 V (2.0 Ah)
7.2 – 24 V (2.6 Ah)
7.2 – 24 V (3.0 Ah)
Weight according
EPTA-Procedure
01/2003
Safety class
Please observe the order number of your charger.
The trade names of individual chargers may vary.
Unit Elements
The numbering of the device elements refers to
the representation of the device on the graphic
page.
1 Battery (without APT wall plug) 7.2 – 14.4 V*
2 Unlocking button*
3 Adapter (not included in delivery)*
4 Green charge control LED
5 Red charge control LED
6 Charging compartment
7 Battery (with APT wall plug) 24 V*
8 Battery (with APT wall plug) 7.2 – 24 V*
* Not all the illustrated or described accessories are
included as standard delivery.
4 • 1 609 929 F80 • TMS • 05.05.04
All manuals and user guides at all-guides.com
AL 2498 FC
PROFESSIONAL
2 607 224 ...
[V=] 7.2 – 24
[A] NiCd: 10/8.5
[A] NiMH: 7
[mA] 100
[°C] 0 – 60
[min] 15
[min] 18
[min] 27
[min] 17
[min] 22
[min] 24
[kg] 1.0
/ II
English - 1

For Your Safety

Read all instructions. Failure to
follow all instructions listed below
may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS.
Connect battery chargers used outside via
a residual current device (RCD).
Protect the battery charger from rain and
moisture. Water penetration in a battery
charger increases the risk of electric shock.
Do not charge batteries of other manufac-
turers. Danger of fire and explosion. The bat-
tery charger is only suitable for charging Bosch
batteries (NiCd/NiMH) having a voltage range
from 7.2 V to 24 V.
Keep the battery charger clean. Contamina-
tion may increase the risk of electric shock.
Before using, always check the battery
charger, cable and plug. If defects are de-
tected, do not use the battery charger.
Never open the battery charger; instead,
have it opened and repaired only by quali-
fied personnel who will use original spare
parts. Damaged battery chargers, cables and
plugs increase the risk of electric shock.
Do not operate the battery charger on eas-
ily inflammable surfaces (e. g. paper, tex-
tiles, etc.) or combustible surroundings.
The heating of the battery charger during
charging may cause a fire.

Initial Operation

Observe correct mains voltage: The voltage of
the power source must agree with the voltage
specified on the nameplate of the unit.