Loading Silverware Basket - Haier DWL7075DBWW Guide De L'utilisateur

English

LOADING SILVERWARE BASKET

Load the silverware basket while it is in the bottom rack or remove the basket
and place on a counter or table for loading. (See recommended loading pattern
shown)
NOTE: Unload or remove the basket before unloading the racks to avoid water
drops from falling on the silverware.
• Load items with covers down, using the separators to prevent silverware
nesting.
• Place small items such as baby bottle caps, jar lids, corncob holders, etc. in the
section(s) with hinged cover(s). Close the cover to hold small items in place.
• When covers are up, mix items in each section of the basket with some
pointing up and some down to avoid nesting. Spray cannot reach nested items.
IMPORTANT: Always load sharp items (knives, skewers, etc.) pointing down.
Be sure that nothing protrudes through bottom of the basket or rack that may
block the wash arm.
NOTES:
• Do not load silver or silver-plated silverware with stainless steel. These metals
can be damaged by contact with each other during washing.
• Some foods (such as salt, vinegar, milk products, fruit juices, etc.), can pit or
corrode silverware. Run a rinse cycle if you do not have a full load to wash
immediately.
13
All manuals and user guides at all-guides.com