Natural Gas Conversion - KitchenAid KFDD500ESS Instructions D'installation

WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
1. Turn manual shutoff valve to the closed position.
A
A. Gas supply line
B. Shutoff valve (closed position)
C. To range
2. Unplug range or disconnect power.
To Convert Gas Pressure Regulator
1. Locate gas pressure regulator at the rear of the range.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.

Natural Gas Conversion

2. Unscrew the regulator cap, and then remove the plastic
cover.
3. Flip the regulator cap over, and then replace the plastic cover.
B
C
4. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Surface Burners
1. If the burner grates are installed, remove them.
2. Remove the burner caps.
3. Using a Phillips or T20
base.
A
A. Plastic cover
B. Regulator cap
B
A
A. LP gas position
B. Natural gas position
C. Plastic cover
® Torx ® screwdriver, remove the burner
A
C
B
D
A. Burner cap C. Burner base screws
B. Gas tube opening D. Burner base
A
B
C
15