AL-KO Nice LP22 Mode D'emploi page 14

English
Troubleshooting
Before performing any maintenance or cleaning work, always pull out the mains plug and
!
wait until the cutter has come to a standstill.
Fault
Motor does not run
Motor power drops
Grass catcher is not filled
sufficiently
Wheel drive does not
function
Faults which cannot be rectified with the aid of this table may be rectified by a specialist company only
(customer service centre).
en-5
Remedial action
Check mains connection cable and circuit-beaker (fuse)
Start on short grass or on an area which has already been mown
Clean discharge channel / housing – the mowing blade must rotate
freely
Correct the cutting height
Correct the cutting height
Clean discharge channel / housing
Have mowing blade resharpened / replaced
Correct the cutting height
Allow the lawn to dry
Have mowing blade resharpened / replaced
Clean the grille on the grass catcher
Clean the discharge channel / housing
Re-adjust the Bowden cable
Check the V-belt / gears
Check the drive wheels for damage
Ð
customer service centre
Ð
customer service centre