The Initial Settings Procedure - Samsung HT-E4500K Guide D'utilisation

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
2 . Use the ▲▼◀▶ buttons on the remote
to select the desired language, and then
press the E button twice. The Start screen
appears.
3 · Press the E button to start setup. The
Network Settings screen appears.
Initial Settings > Network Settings (1/5)
No network cable or Samsung Wireless LAN Adapter
connected.
Please plug in a network cable or a Samsung Wireless
LAN Adapter.
4 · Connect the network cable or insert the
Samsung Wireless LAN Adapter.
24
|
English
<Incase of Network Cable connected>
Initial Settings > Network Settings (1/5)
Network cable connected.
Press Next to configure your wired network settings.
If you want to connect to your wireless network, plug in
a Samsung Wireless LAN Adapter.
5 . Press the E button to set up the product's
wireless network connecton or select Skip,
and then press the E button to skip
network setup. If you selected Skip, go to
Step 9.
6 . If the connection is successful, the
Connection Complete screen appears. Select
Next, and then press the E button. The
Software Upgrade screen appears.
| NOTE |
\ If the connection is not successful, select Next, and then
press the E button. After you have completed the Initial
Previous
Settings procedure, go to "Wired Network" on page 31 to
Next
set up the product's wired network connection.
Skip
7 . To upgrade the software, select Next, and
then press the E button. To skip the
upgrade, select Skip, press the E button,
and go to Step 9.
| |
NOTE
\ If you skipped network set up, you must skip software
upgrade also.
8 . If there is a software upgrade available, the
product downloads and installs the upgrade.
This can take some time. If there is no
software upgrade available, the "No software
to upgrade currently." message appears.
Select Next, and then press the E button.
The TV Aspect Ratio screen appears.
Previous
Next
Skip